Mount initialization
RST mount can be initialized in the following way. Do this only when the mount works abnormally or when
By ByoungJun|2022-09-06T09:21:14+09:00April 7th, 2022|Tutorial|
RST mount can be initialized in the following way. Do this only when the mount works abnormally or when
By ByoungJun|2020-08-31T14:35:19+09:00August 31st, 2020|Tutorial|
What is Eclipse Mode? The special feature of tracking the sun (or moon) and rotating along the edge
By ByoungJun|2021-07-26T13:29:43+09:00March 8th, 2020|Tutorial|
This information is included in the user manual and applies to all mount products of RainbowAstro ※ Do
By ByoungJun|2020-02-27T14:32:40+09:00February 23rd, 2020|Tutorial|
Install the USB driver for connection the mount and PC. The driver can be downloaded from the Rainbow Astro website. Before the mount connect to PC, setup the Communication via hand controller. Set the USB mode ON and Protocol Rainbow in [7.MENU] - COMMUNICATION. Refer to the link below to install the ASCOM Platform http://ascom-standards.org/ 1. Connect the mount to PC using USB cable, then power on the mount. 2. Run the "TheSkyX" and click on Telescope - Telescope Setup in menu on the upper side of the screen. 3.
By ByoungJun|2020-03-08T13:28:20+09:00February 23rd, 2020|Tutorial|
The orbit of the satellite changes frequently, so always use the latest data. To track satellites, mount must
By ByoungJun|2020-02-27T14:34:21+09:00February 23rd, 2020|Tutorial|
1. The sky safari connection is supported in firmware version V190619 and later. Please update if your version is